Buschraft Knife from Casstrom Sweden in K720
This great new knife is built as a multipurpose knife for hunting, bushcraft and general use in the great outdoors. The blade is 3 7/8" long and made using 3.8mm thick K720 tool steel and heat treated to achieve a hardness of 58-60 HRC. The knives are ground with a shaving sharp flat Scandinavian grind and have a satin finish. This steel in combination with the grind makes these knives very strong, yet very easy to sharpen and it takes a great edge.
The handle is available in Classic Oak, Curly Maple, Bubinga or Green Canvas Micarta. There are black liners between the handle scales and steel to enhance durability over time. The wood has been treated with a traditional Scandinavian linseed oil based varnish.
The knife comes with a sturdy welted sheath made from black 3mm vegetable tanned full-grain leather. The sheath features an extra wide belt loop, a fluid draining hole and a lanyard hole.
Pair with the Black Carabiner Dangler for a full featured bushcraft rig:
ABOUT K720
Böhler Tool Steel K720 (O2) is a very tough and strong oil hardened high carbon tool steel. The chemical composition allows it to be hardened to a high degree whilst maintaining ductility and toughness at the same time as it is easy to sharpen and can obtain a razor sharp edge. Whilst easy to sharpen, the low chromium content means it will tarnish if left wet and it must therefore be wiped after use and protected by oil or wax when put away for storage.O2 Steel Composition: 0.9C, 0.25Si, 2.0Mn, 0.35Cr, 0.1V