Outdoor Knife from Casstrom of Sweden in Sandvik Stainless Steel
Featuring highly figured stabilised and blue dyed Curly Birch this knife is as beautiful as it is durable. Stablised wood is treated in a vacuum chamber to impregnate the wood with a special resin that fills all of the voids in the wood. Once heated then finished this process makes the wood completely dimensionally stable with no chance to warp, shrink or crack. This process adds considerably to the cost of the wood but ensure you have a knife that could be handed down for generations to come.
This strong full-tang knife is built for versatile use during hunting, fishing and general use of the forest. It is a very sturdy knife you can skin a moose with, fillet a fish with as well as carve wood. The blade is about 3 7/8" long and made of about 3.5 mm thick Sandvik 14C28N, a Swedish stainless steel developed specifically for knives (58-59 HRC).
The knife is sharpened with a Full Flat grind and has a satin finish. This steel is combined with the grinding makes these knives very easy to cut with, effective for a variety of tasks and maintain an edge well, but is still very easy to sharpen. This type of grind is not optimal for batoning and prying but rather optimised for efficient cutting due to the low angle and thinness behind the edge. To increase the strength the secondary bevel needs to be sharpened back and angle increased a little, however for heavy use we would recommend you choosing a version with Scandi grind.
The knife comes with a very sturdy knife sheath made of 3mm thick vegetable tanned leather. The sheath has an extra wide belt loop, a bottom opening for fluid and a hole for a leg attachment.
Pair with the Black Carabiner Dangler for a full featured bushcraft rig:
About the steel: Sandvik stainless steel 14C28N
Sandvik's most recently developed product in its popular series of knife steel. The optimized composition creates a steel with a unique combination of excellent edge holding features (stability, sharpenability and sharpness), high hardness and high corrosion resistance. This new version steel has the ability to be heat treated so that the wear resistance is improved over prior steel types without affecting the microstructure. To sharpen the knife is therefore relatively easy, while edge stability in terms of chipping and edge rolling is still very good. Steel structure analysis: C 0.62%, Si 0.2%, Mn 0.6%, P 0.025%, S 0.01%, Cr 14.0%, N 0.11%